Uptake of alkali and alkaline earth metal ions into electrochemically pretreated glassy carbon fibres by flow-through electrolysis

When glassy carbon fibres are used, alkali and alkaline earth metal ions are adsorbed in the micropores which are created or activated by oxidative treatment of the fibres. The average pore radius was estimated to be 2 nm by nitrogen adsorption experiments. Uptake was studied with a flow system consisting of a flow-through carbon-fibre electrode; a dropping mercury electrode at the end of the flow line monitored changes in the metal ion concentrations. The ions were taken up at negative potentials and released at positive potentials. The amount taken up increased in the sequence Na⁺ < Li⁺ < H⁺, suggesting that the ions were desolvated before entering the pore system.     

Electron microscope observation of lattice defects in the FeCr σ-phase

The lattice image of the FeCr σ-phase was observed by high-resolution electron microscopy with the c axis of the tetragonal cell parallel to the incident beam. It was found that bright dots of the observed image correspond to the positions of atoms in the $\text{z = ±}\text{1}\text{4}$ planes of the σ-phase structure. Sequence faults were found in the irregular part of the lattice image. The analysis of the faults shows that an extra plane of $\text{1}\text{2}\text{a}{}_0$ width is inserted into the regular structure and one side of the fault is slightly shifted parallel to the fault plane with respect to the other side, which is consistent with the model proposed by Frank and Kasper. A unit cell step of the sequence faults was found and a model of the step was proposed.     

Effect of TRX-liposomes size on their prolonged circulation in rats

Newly formulated cationic liposomes (TRX-liposomes) with four different mean diameters were injected into twelve male rats via the lateral tail vein in order to evaluate the effect of liposomal size on pharmacokinetic parameters. TRX-liposomes disappeared from the blood according to the one-compartment model and demonstrated maximum and minimum half-lives of ca. 14 h (mean diameter of 114.3 nm) and ca. 5 h (mean diameter of 285.9 nm), respectively. This prolonged half-life tended to decrease at the boundary of 114.3 nm mean diameter. The optimal size (114.3 nm) for prolonged circulation of TRX-liposomes was consistent with that of pegylated liposomes such as Doxil((R)), however, the half-life was different among these liposomes. The electric charge of the TRX-liposomal surface is assumed to be responsible for this difference. The results of the present study will be very useful in the design of long-circulating cationic liposomes.     

Preparation of crystalline polyamides by the alternating copolymerization of aziridines and cyclic imides

The copolymerization of aziridines and cyclic imides was studied. Aziridines copolymerized alternately with cyclic imides to give crystalline polyamides. Ethylenimine and succinimide copolymerized to nylon 2,4, melting near 300°C., without any catalyst. Similarly, the corresponding crystalline polyamides were obtained from the systems of 1,2-propylenimine–succinimide, ethylenimine–glutarimide, and ethylenimine–phthalimide. The copolymerization of aziridines and cyclic imides in the presence of BF₃OEt₂ gave a copolymer which was rich in aziridine units, whereas, the addition of triethylamine had no influence on the copolymer composition. A mechanism of copolymerization was proposed based on the facts that N-tetramethylenesuccinamide was obtained by the reaction of pyrrolidine and succinimide, N-acetylethylenimine reacted with acetamide to yield N,N′-diacetylethylenediamine and that the rate of this copolymerization was dependent on the electrophilicity of imide.     

Ring transformation of 6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine. IV (1). Reduction and reaction of 5a-acetyl-6a-ethoxycarbonyl-5a,6a-dihydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine-3-carbonitriles with primary amines

The reaction of 5a-acetyl-6-ethoxycarbonyl-5a,6a-dihydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine-3-carbonitrile ( 1a ) with benzylamine gave ethyl l-benzyl-5-cyano-8a,9-dihydro-2-methyl-1H-pyrrolo[3,4-e]-pyrazolo[1,5-a]pyrimidine-8a-carboxylate ( 2a ), in addition to 5-acetyl-3-benzylamino-1-(4-cyanopyrazol-3-yl)- 2-pyridone ( 3 ). Reaction of 1a with aniline gave ethyl 6-acetyl-8-anilino-3-cyano-7,8-dihydro-4H-pyrazolo-[1,5-a][1,3]diazepine-8-carboxylate ( 4 ), in addition to ethyl 3-cyano-7-methyl-6-pyrazolo[1,5-a]pyrimidine-acrylate ( 5 ). On the other hand, the same reactions of 1b with benzylamine or aniline gave 2b or 8b , respectively. Though catalytic hydrogenation of 1a over 5% palladium-carbon proceeded by ring fission of cyclopropane ring to give 9 , 1a (or 1b ) afforded 4,5-dihydro derivatives ( 13 or 15 ) by catalytic hydrogenation over platinum oxide. The reactivity of 5-methoxy-4,5,5a,6a-tetrahydro-6H-cyclopropa[e]pyrazolo[1,5-a]pyrimidine ( 16 ), which are related analogs of 1a,b , is also described.     

Solvent extraction and spectrophotometric determination of iron(II) with 2,2′-dipyridyl-2-furancarbothiohydrazone

2,2′-Dipyridyl-2-furancarbothiohydrazone (DPFTH) was used for the spectrophotometric determination of trace amount of iron(II) after the extraction process. Iron(II) can be quantitatively extracted with DPFTH in benzene from aqueous solution buffered to 3.0–8.0. The extracted species has absorption maxima at 440, 477, and 738 nm and obeyed Beer's law over the range 0–40 μg of iron in 10 ml at 738 nm. The molar absorptivity at this wave length is 1.17 × 10⁴ liters mole^?1 cm^?1. The proposed method is relatively selective for iron(II) and is satisfactorily applied to the determination of the total iron in natural waters. The proton dissociation constants of the ligand determined spectrophotometrically were pK_a1 = 2.88 and pK_a1 = 6.70 at 25 °C and μ = 0.1.     

Reactions of 1,2-dimethoxytetramethyldisilane with styrenes: Formation of a new type of silacyclopentanes having phenyl substituents on ring carbons

The reaction of 1,2-dimethoxytetramethyldisilane with styrene and α-methylstyrene in the presence of NaOMe catalyst in tetrahydrofuran (THF) gave the new silacyclopentanes 1,1-dimethyl-2,4-diphenyl-1-silacyclopentane (IIIa) and 1,1,2,4-tetramethyl-2,4-diphenyl-1-silacyclopentane (IIIb), respectively. These silacyclopentanes were found to exist as cis-trans mixtures. The use of sodium metal in place of NaOMe afforded similar results. Reactions of a polysilane mixture, MeO-(SiMe₂)_nOMe (n ≧ 3), with the styrenes also gave similar results. In some cases, polysilacycloalkanes such as 1,2,3-trisilacyclopentanes (IV) and 1,2,3,4-tetrasilacyclohexanes (V) were obtained as by-products. A mechanism for the formation of the silacyclopentanes and polysilacycloalkanes is presented. It was found that electron impact decomposition of silacyclopentanes IIIa and IIIb, trisilacycloalkane IV and tetrasilacycloalkane V gave molecular ions corresponding to the silacyclopropane, cyclotrisilane and cyclotetrasilane systems.     

Acylated-oxypregnane glycosides from the roots of Araujia sericifera

Twenty-three new acylated-oxypregnane glycosides were obtained from the roots of Araujia sericifera. (Asclepiadaceae). These glycosides were confirmed to be tetraglycosides possessing twelve known compounds, 12-O-benzoyllineolon, 12-O-benzoyldeacylmetaplexigenin, ikemagenin, kidjolanin, cynanchogenin, caudatin, rostratamine, penupogenin, 12-O-benzoylisolineolon, 12-O-tigloyldecylmetaplexigenin (incisagenin), 12-O-benzoyl-20-O-acetylsarcostin, 20-O-benzoyl-12-O-(E)-cinnamoyl-3 beta,5 alpha,8 beta,12 beta,14 beta,17 beta,20-heptahydroxy-(20S)-pregn-6-ene and ten new acylated-oxypregnanes, 12-O-benzoyl-20S-hydroxyisolineolon, 12-O-tigloyllineolon, 12-O-salicyloyllineolon, 12-O-salicyloyldeacylmetplexigenin, 12-O-benzoyl-3 beta,5 alpha,8 beta,12 beta,14 beta,17 beta-hexahydroxypregn-6-en-20-one, 12-O-benzoyl-19-benzoyloxydeacylmetapleligenin, 12-O-benzoyl-19-benzoyloxy-20-O-acetylsarcostin, 12-O-benzoyl-19-salicyloyloxy-20-O-acetylsarcostin, 12-O-benzoyl-5 alpha,6 alpha-epoxydeacylmetaplexigenin, and 12-O-benzoyl-5 alpha,6 alpha-epoxylineolon as their aglycones, using both spectroscopic and chemical methods.     

Molecular structures of isobutene and 2,3-dimethyl-2-butene as studied by gas electron diffraction

The structures of isobutene and 2,3-dimethyl-2-butene have been studied by gas electron diffraction. For isobutene the rotational constants obtained by Laurie by microwave spectroscopy have also been taken into account. Leastsquares analyses have given the following r_g bond distances and valence angles (r_av for isobutene and r_α for dimethylbutene): for isobutene, r(CC) = 1.342±0.003 Å, r(C-C)= 1.508±0.002Å, r(C-H, methyl) = 1.119±0.007 Å, r(C-H, methylene) = 1.095±0.020 Å, ∠(C-CC) = 122.2±0.2°, ∠(H-C-H) = 107.9±0.8°, and ∠(C-C-H) 121.3±1.5°; for dimethylbutene, r(CC)= 1.353 ±0.004 Å, r(C-C) = 1.511±0.002 Å, r(C-H) = 1.118± 0.004 Å, ∠(C-CC)= 123.9±0.5°, and ∠(H-C-H)= 107.0±1.0°, where the uncertainties represent estimated limits of experimental error. The bond distances and valence angles in these molecules and in related molecules are compared with one another. The CC and C-C bond distances increase almost regularly with the number of methyl groups, and the C-C bonds in isobutene and dimethylbutene are shorter than those in acetaldehyde and acetone by about 0.01 Å. Systematic variations in the C-CC angles suggest the steric influence of methyl groups.     

Vinyl polymerization. 413. Polymerization of vinyl monomer initiated by poly(vinylbenzyltrimethyl)-ammonium chloride

The polymerization of vinyl monomer initiated by an aqueous solution of poly(vinylbenzyltrimethyl)ammonium chloride (Q-PVBACI) was carried out at 85°C. Styrene, p-chlorostyrene, methyl methacrylate, and i-butyl methacrylate were polymerized, whereas acrylonitrile and vinyl acetate were not. The effects of the amounts of vinyl monomer, Q-PVBACI, and water on the conversion of vinyl monomer were studied. The overall activation energy in the polymerization of styrene was estimated as 79.1 kJ mol^?1. The polymerization proceeded through a radical mechanism. The selectivity of vinyl monomer was discussed by “a concept of hard and soft hydrophobic areas and monomers.”